1-866-948-DATA (3282)

       
           
  F16F-J4000R                                                      |    Specifications    |    Accessories    |    Datasheet  
           
   
  • Expansion enclosure for Fibre-to-Fibre RAID systems
  • Controllers with loop switches dynamically distribute data to individual disks
  • Highest density, 16 drives in 3U rack space
  • Redundant SBOD controllers
  • Fault-tolerant dual-loop connectivity
  • Two (2) 4G FC ports per controller
  • Diagnostics LED panel
  • Proprietary enclosure service via in-band connections with the managing RAID enclosure
   
 
           
Host-to-drive Interface
SBOD Model
Corresponding RAID Subsystems
Configuration
Form Factor
Model Max.
Connections

4GB FC to 4GB FC
F16F-J4000-R
7 + 7 SBODs
Redundant loop-switched controllers
3U rackmount
6 SBODs
6 +7 SBODs
 
  Specifications        
  System Components        
 
  • Redundant SBOD controller configurations
  • Fault-tolerant modules interfaced through a common backplane
  • Redundant, hot swappable 530W power supply units
  • Redundant, dual-speed cooling modules
  • LED diagnostic panel
  • Easy-to-use rotary ID switch to set AL_PA
 
  Host Interface        
 
  • Two (2) 4G FC ports per controller
  • SES enclosure service via in-band methodology
 
  Drive Interface        
 
  • Sixteen (16) hot swappable 4G FC disk drives
 
  Management        
 
  • Management of multiple enclosures via RAID firmware and/or through GUI
  • Module status LED indicators:
  • Six (6) on LED panel (1 service LED and 5 status LEDs)
  • Two (2) per drive tray
  • Three (3) per controller module (1 Ready/Failed LED and two (2) Link status LEDs)
  • One (1) per power supply unit
  • Two (2) per cooling module
 
  Physical/Electrical  
  Interfaces  
 
  • Host Interface: Two (2) SPF ports per SBOD controller.  
  • Drive Interface: 4G FC
 
  Power Supply Module  
 
  Power Requirements
  Input Voltage
  100VAC @ 9A
  240VAC @ 4.5A with PFC (auto-switching)
  Frequency    47 to 63Hz
  Power Consumption    530W
 
  Cooling Module  
 
  Specifications
  Speed
  High or low rotation speed controlled by firmware proactive   mechanisms
  Maximum Air Flow
  (each module)
  High speed: 90CFM
  Low speed: 70.7CFM



 
  Environmental Specifications  
 
Temperature

Operating: 0° to 40°C (32° F to 104° F)
Non-operating: - 40° to 60°C (-40° F to 140° F)

Relative Humidity
5% to 95% (non condensing - operating and non-operating)
Altitude
Operating: sea level to 12,000 ft
Non-operating: sea level to 40,000 ft
 
  Dimensions  
 
  • Chassis without handles: 445(W) x 130(H) x 488.2(D) mm (17.5 x 5.1 x 19.2 inches)
  • Chassis with handles: 482.6(W) x 131(H) x 504.3(D) mm (19 x 5.2 x 19.8 inches)
  • Package: 423(H) x 567(W) x 772(D) mm (16.7 x 22.3 x 30.4 inches)
 
  System weight  
 
  • Net weight: 33kg (72.6 pounds)
  • Gross weight: 35kg (77 pounds)
 
   
  Return to Top