1-866-948-DATA (3282)

       
           
  FF-R4030 / FF-S4030                                             |    Specifications       Accessories    |    Datasheet  
           
   
  • 4G FC-to-FC RAID controller head
  • Twelve (12) 4G FC SFP ports
  • SAS (Serial Attached SCSI) wide links to drive enclosures (as backup or less-frequently accessed volumes)
  • Fault-tolerant connection points to DAS or switched fabric
  • Hardware RAID6 engine by dedicated ASIC400 chipsets
  • Redundant-/single-RAID controller configurations
  • Dedicated SATA RCC (Redundant Controller Communications) channels
  • Corresponding drive enclosures:
    • F16F-J4000-R loop-switched SBODs
    • S16S-J1000-R/S JBODs (using SATA-II 3Gbps drives)
 
           
Host-to-drive Interface
Model
Configuration
Form Factor
 Fibre Ports Fibre
Channels 		SAS
Channels
4G FC-to-FC/SATA-II

FF-R4030-6

Redundant controller
1U Rackmount
12
12
2
4G FC-to-FC/SATA-II

FF-S4030-6

Single controller
1U Rackmount
12
6
1
 
  Specifications        
  RAID        
 
  • Hardware RAID engine
  • Supports RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
  • RAID Migration
  • Configurable stripe size and write policy per array
  • Multiple Global, Dedicated, & Enclosure-specific hot-spares
  • Intelligent Drive Handling:
    • In degraded mode: skips irreparable blocks to continue rebuild
      • In normal operation: data-block verification and repair
 
  System Components        
 
  • Compact 1U enclosure
  • Dual-active/Single- RAID controller configurations
  • Fault-tolerant modules interfaced through a common backplane
  • One (1) 512MB DDR DIMM per controller (default, supports up to 2GB in size)
  • Redundant, hot-swappable 250W power supply units
  • Redundant, dual-speed cooling modules 
  • Hot-swappable I/O modules
  • LCD keypad panel
  • Li-Ion battery backup unit (BBU), life expectancy and charge level aware
 
  Host Interface        
 
  • Four (4) out of the six (6) 4G FC channels per controller
  • 32Gbps bandwidth via separate host ports from individual controllers
  • Hot-swappable I/O modules
  • Concurrent I/O commands
  • Tagged command queuing up to 1024
  • Max. command queue up to 1024
  • Fault-tolerant host links via external FC switches or the onboard hub
 
  Drive Interface        
 
  • Two (2 - default) or four (4 - manual) in dual-loops to F16F series FC drive enclosures
  • Two (2 - R4030) or one (1 - S4030) SAS ports (SFF-8470) to S16S series drive enclosures (using SATA-II disk drives)
  • S.M.A.R.T. support
  • Automatic bad-sector reassignment
  • Intelligent loop switched access fairness dual-loop
  • SES enclosure service support through the drive loops
 
  Management        
 
  • COM1 serial port for local access to firmware-embedded utility
  • COM2 for UPS connection
  • GUI, Telnet, and SSH system access via an Ethernet port
  • Browser-based or Java-based RAIDWatch manager software
  • Management of multiple enclosures via RAID firmware and/or through GUI
  • Firmware-embedded manager via RS-232C (audio jack) that is platform independent
  • Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, and MSN
  • LCD keypad panel to all configuration options
  • Variable logical drive options per DIMM size
  • Module status LED indicators:
    • Seven (7) per controller module
        • One (1) per power supply unit
        • One (1) per BBU module
        • Two (2) per cooling module
        • Three (3) per LCD panel
        • Two (2) per Ethernet port
        • Two (2) per Fibre port on I/O module
    • Presence detect & thermal sensors via I²C bus (via SES with drive enclosures)
 
  Physical/Electrical  
  Interfaces  
 
  • Twelve (12) Fibre SFP ports on individual I/O modules, with onboard hub
  • Two (2 - R4030) or one (1 - S4030) SAS wide ports (SFF-8470 Infiniband type)
  • One (1) Fast Ethernet management port (per controller)
  • Two (2) serial COM ports (per controller)
 
  Power Supply Module  
  Redundant hot-swappable power supplies with PFC  
 
Input
  100VAC at 5A, 240VAC at 2.5A with PFC (auto-switching)
   47 to 63Hz
Output
  (Maximum output: 250 Watts)
  +12.0V
  16A max.
  + 5.0V
  25A max.
  + 3.3V   20A max.
 
  Cooling Module  
  Redundant dual-thermal-fan cooling modules  
 
Maximum Air Flow
High speed: 31.8 CFM
Low speed: 20.1 CFM
 
  Environmental Specifications  
 
Temperature Operating: 0° to 40°C (32° F to 104° F) (without BBU)
Operating: 0° to 35°C (32° F to 95° F) (with BBU)
Non-operating: - 40° to 60°C (-40° F to 140° F)
Relative Humidity
5% to 95% (non condensing - operating and non-operating)
Altitude
Operating: sea level to 12,000 ft
Non-operating: sea level to 40,000 ft
 
  Dimensions  
 
  • 43.5mm(H) x 442mm(W) x 540mm(L) (1.7 x 17.4 x 21.3 inches)
  • Package: 18(H) x 59(W) x 72(D) cm (7.1 x 23.2 x 28.3 inches)
  
  System weight  
 
  • Net weight: 10kg (22 pounds)
  • Gross weight: 11.5kg (25.3 pounds)
 
   
  Return to Top