|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
 |
|
- SCSI-320 host channel; transfer rate up to 320MBps per channel
- Single RAID controller providing complete RAID functionality
- Compact 1U space-saving design
- Supports up to four (4) SATA-II (3Gbps) , 3Gbps disk drives; backward compatible with SATA-I disk drives
- SATA NCQ (Native Command Queuing) support
- Real-time event notification by a variety of methods
|
|
|
| |
|
|
|
|
|
|
SCSI to SATA |
A04U-G2421 |
Single controller |
1U Rackmount |
|
|
| |
|
|
|
|
| |
|
|
|
|
|
| |
- Multiple arrays configurable with dedicated or global hot spares
- RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, and NRAID
- Online expansion by:
- Adding new drives
- Copying and replacing drives with drives of larger capacity
- Automatic background rebuilds Configurable stripe size and write policy per array
|
|
| |
|
|
|
|
| |
- Single controller configuration provides full RAID functionalities
- One (1) EonStor® compact 1U enclosure
- One (1) RAID controller module
- One (1) 256MB DDR RAM DIMM module (pre-installed on the controller module)
- One (1) 200W power supply unit
- Two (2) single-speed cooling fans
- Four (4) hot-swappable drive trays
|
|
| |
|
|
|
|
| |
- One (1) SCSI-320 through two (2) VHDCI 68-pin SCSI ports; SCSI-160 backward compatible
- Concurrent I/O commands
- Tagged command queuing up to 256
- Variable stripe size per logical drive
- Optimization setting for random or sequential I/O
|
|
| |
Drive Interface |
|
|
|
|
| |
- Four (4) 3Gbps SATA-II (3Gbps) , hot-swappable drive trays that accommodate 1-inch pitch, 3.5-inch SATA-I or SATA-II (3Gbps) disk drives
- Automatic bad-sector reassignment
- Dedicated bandwidth to each connected drive
|
|
| |
|
|
|
|
| |
- 10/100 BaseT Ethernet for out-of-band management
- One (1) RS-232C serial port for local access to firmware-embedded utility
|
|
| |
|
| |
- VT-100 terminal emulation via RS-232C
- Telnet access via onboard Ethernet port
- Cross-platform, remote administration with SSL
- Out-of-band access via Ethernet
- Centralized management to monitor and administer multiple RAID units on one screen
Configuration client for real-time event notification over Email, Fax, LAN broadcast, SNMP Traps, MSN messenger, SMS short messages, and the configuration utility screen |
|
| |
|
| |
- SNMP trap event notification with plain-text event message (no MIB file required)
- SNMP V2.0 MIB file support with get-and-set commands
|
|
| |
|
| |
Onboard alarm is triggered when one of the following modules fails:
- RAID controller module
- Cooling fans
- Hard drive
|
|
| |
|
| |
- Two (2) per drive tray
- Three (3) per LED panel
- Four (4) per RAID controller module
- Two (2) per Ethernet port
Module failure alert through I²C bus |
|
| |
|
| |
|
| |
- Two (2) ports in one (1) dual-stacked VHDCI SCSI connector
- One (1) COM port (38400, n, 8, 1)
- One (1) 10/100BaseT Ethernet port
|
|
| |
|
| |
Two (2) single-speed cooling fans |
|
| |
|
|
| |
|
| |
Operating: 0º to 40ºC (32º F to 104º F)
Non-operating: - 40º to 60ºC (-40º F to 149º F) |
5 ~ 95%, non-condensing |
Operating: sea level to 12,000 ft
Non-operating: sea level to 40,000 ft |
|
|
| |
|
| |
- Without handles: 445 (W) x 43.5 (H) x 511 (D) mm (17.5 x 1.7 x 20.1 inches)
- With handles: 478 (W) x 43.5 (H) x 511 (D mm (18.8 x 1.7 x 20.1 inches)
- Package: 582 (W) x 180 (H) x 718 (D) mm (22.9 x 7 x 28.3 inches)
|
|
| |
|
| |
- Net weight: 8 Kg (approx.)
- Gross weight: 10 kg
|
|
| |
 |
|
| |
Return to Top |
|
| |
|
|
|
|
|
